Name of Water Feature -
Touch the box and use the keyboard to name the water feature.
Does Water feature Have a Pump?
Select whether the water feature has a dedicated
pump. If so, the OmniPL will turn this pump on when the water feature is scheduled to
run.
If Yes is selected:
What Type?
Select the type of pump used. The choices are Single Speed, Two
Speed and VSP.
If single speed or two speed pump is selected:
Which Relay is it Wired to?
If using a single speed or two speed
pump, you’ll be asked which relay(s) is wired to the pump. If a value
is already shown in the box(es), advance to the next screen. If no
value is shown, selecting the box will bring you to a table showing all
detected relays. Select the proper relay(s) from the table and touch
the Done. The relay(s) should now be shown in the box(es) and you
can advance to the next screen to continue the pump configuration.
Would You Like to Enable Priming?
Select whether you want the
pump to prime when turned on. This will turn the pump on at high
speed for 3 minutes to establish normal water flow every time the
pump is activated after being off for at least 30 seconds. This option
only appears if the pump is configured as a 2-speed pump.
If VSP is selected:
Which Hayward Unique Address?
If using a VSP for your water
feature pump, you’ll be asked what is the Hayward Unique Address
(HUA). If a value is already shown in the box, advance to the next
screen. If no value is shown, selecting the box will bring you to a
table showing all detected devices. Select the proper HUA from the
table and touch the Done button. If unsure of the HUA, refer to the
pump’s manual for instructions on how to determine the pump’s HUA.
Once selected, the address should now be shown in the box and you
can advance to the next screen to continue the VSP configuration.
Pump Capacity -
Set the minimum and maximum RPM of the pump.
Refer to your pump manual for more information.
Permitted User Setting -
The OmniPL will automatically calculate
these values based on the minimum and maximum RPM that were
previously entered. They can be changed as desired.
Speed Presets -
Set the Low Pump Speed %, Medium Pump Speed
%, and High Pump Speed %, presets. These presets will be used
when setting schedules for your pump.
Would You Like to Enable Priming?
Select whether you want the
41
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS