Basic safety precautions should always be followed, including the following: Failure to follow instructions
may result in injury.
This is the safety-alert symbol. When you see this symbol on your pump or in this manual, look for
one of the following signal words, and be alert to the potential for personal injury.
WARNING
warns about hazards that
could
cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION
warns about hazards that
will
or
can
cause minor or moderate personal injury and/or
property damage and if ignored presents a potential hazard. It can also make consumers aware of actions
that are unpredictable and unsafe.
The
NOTICE
label indicates special instructions that are important but not related to hazards.
1.
IMPORTANT SAFETY INSTRUCTIONS
Before installing or servicing this electrical equipment, turn the power supply OFF.
WARNING
– Read and follow all instructions in this owner’s manual and on the equipment.
Failure to follow instructions can cause severe injury and/or death.
WARNING
– This product should be installed and serviced only by a qualified professional.
CAUTION
– All electrical wiring MUST be in conformance with all applicable local codes,
regulations, and the National Electric Code (NEC).
USE OF NON-HAYWARD REPLACEMENT PARTS VOIDS WARRANTY.
ATTENTION INSTALLER - THIS MANUAL CONTAINS IMPORTANT INFORMATION
ABOUT THE INSTALLATION, OPERATION, AND SAFE USE OF THIS VARIABLE SPEED
PUMP THAT MUST BE FURNISHED TO THE END USER OF THIS PRODUCT. FAILURE
TO READ AND FOLLOW ALL INSTRUCTIONS COULD RESULT IN SERIOUS INJURY.
WARNING
– To reduce risk of injury, do not permit children to use or climb on this product.
CAUTION
– This product is designed for indoor and outdoor use. If used outdoors, it is strongly
advised to protect the electrical components from the weather. Select a well-drained area, one that will
not flood when it rains. It requires free circulation of air for cooling. Do not install in a damp or non-
ventilated location. If installed within an outer enclosure or beneath, adequate ventilation and free
circulation of air must be provided to prevent overheating of the motor.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
_____________________________________________________________________________________
Hayward Flow Control
www.haywardflowcontrol.com
1-888-HAY-INDL (1-888-429-4635)
IS3401VSPFC Rev A 12/08/14
Pg. 3 of 36
