5.
Wiring Diagrams
5.1. Input Power/Motor Wiring (Required)
Figure 5.1-1
5.2. Wall Mounted Digital Control Interface Wiring (Optional)
Figure 5.2.-1
Connection wire must be rated for a minimum of 300V, and may be up to 500 feet in length. Use
removable 6-position terminal block connectors for wiring connection to display and motor drive board
taking care to note the wire colors and corresponding numbers next to the connectors. Do
not
connect to
the upper input terminals shown as light gray above.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
_____________________________________________________________________________________
Hayward Flow Control
www.haywardflowcontrol.com
1-888-HAY-INDL (1-888-429-4635)
IS3401VSPFC Rev A 12/08/14
Pg. 14 of 36
