Hayward AquaRite 100, Руководство по устранению неисправностей

Страница: 32 / 41

32
Problem Detected LED
With LED #8 With “MAX” LED
Reason Possible Action
No
Current to
Cell
Remove power to the AquaRite 100 for two
minutes and then re-apply to reset system
Turn on
Super Chlorinate briefly then go back to
original setting
Inspect
Cell Vessel and verify Cell Plates are fully
covered by moving water
Reason Possible Action
Cell Error
Remove power to the AquaRite 100 for two (2)
minutes and then re-apply to reset system
Make sure
Cell Cable is secure and free of
damage
If error persists, replace the
Cell
(p/n CCELL)
*Make sure cell cable is secure and free of damage. If damage is found or cord does not fit
securely onto cell contact Hayward Technical Support 908-355-7995