12/19
Model 9035
Page 14 of 26
Step 16:
Loosen the tee set screws from Step 15 and raise the tees flush to the bottoms of the swivel tee-pairs;
(See Figures 13, 13A & 13B.) Align the tees such that the tee pipe cups run parallel to the swivel tee-pair set
screws. Re-tighten the tee set screws.
FIGURE 13 FIGURE 13A FIGURE 13B
(2X Left Side) (2X Right Side)
Step 17:
Gently pull the front and rear vertical pipes apart and insert two (2)
49.12” Pipes, horizontally, into the
tee pipe cups. (See Figure14.) (
It may be necessary to loosen the vertical pipe tees in order to properly align the
horizontal pipes and tees; If so, do this, re-tighten them, and then tighten the tee pipe cup set screws
.)
FIGURE 14
---------------------------------------------------------------------------------------------------- -------------------------------------------------
Tees
4X Swivel Tees
(Swivel Tee-Pair
Bottom Halves)
2X 46.12” Pipes
Tees
Tees
