12/19
Model 9035
Page 9 of 26
Step 5:
Fully insert two (2) 46.12
” Pipes into the open ends of the left and right side fittings. (See Figure 5.)
Tighten the tees and elbows set screws.
Step 6:
Fully insert one (1) 46.12" pipe into the open ends of the rear side fittings. (See Figure 5.) Tighten the
elbow set screws.
FIGURE 5
Step 7:
Measure and mark 1 3/4" down from the top of the four 51.
00” pipes, with a felt tip marking pen.
(See Figure 6.)
FIGURE 6
Right Rear
Right Front
Left Rear
Left Front
3X 46.12” Pipes
4X 51.00” Pipes
1 3/4” From
Top of Pipes
