Hawking HW7ACW, Руководство пользователя

Страница: 90 / 136

83
SSID: The SSID of this wireless access point will be
displayed here.
Authentication Mode: The wireless security
authentication mode of this wireless access point will
be displayed here. If you do not enable security
function of the wireless access point before WPS is
activated, the access point will auto set the security to
WPA (AES) and generate a set passphrase key for WPS
connection.
Passphrase Key: The wireless security key of the
access point will be displayed here.
Config Mode (3)
There are ‘Registrar’ and ‘Enrollee’ modes for the
WPS connection. When ‘Registrar’ is enabled, the
wireless clients will follow the access point’s wireless
settings for WPS connection. When ‘Enrolle’ mode is
enabled, the access point will follow the wireless
settings of wireless client for WPS connection.
Configure
Click ‘Start PBC’ to start Push-Button style WPS
by Push Button (4) setup procedure. This wireless access point will wait
for WPS requests from wireless clients for 2 minutes.
The ‘WLAN’ LED light on the wireless access point
will be steady for 2 minutes when this wireless access
point is waiting for incoming WPS request.
Input client
Please input the PIN code of the wireless client you
PinCode (5)
wish to connect, and click ‘Start PIN’ button.
The ‘WLAN’ LED light on the wireless access point
will be steady when this wireless access point is
waiting for incoming WPS request.