Hawking HW7ACW, Руководство пользователя

Страница: 49 / 136

42
2-2-6 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build connection
between wireless network clients and this wireless access point. You don’t
have to select an encryption mode and input a long encryption passphrase
every time when you need to set up a wireless client, you only have to press
a button on the wireless client and this wireless access point, and the WPS
will automatically configure for you.
This wireless access point supports two types of WPS: Push-Button
Configuration (PBC), and PIN code. If you want to use PBC, you have to
push a specific button on the wireless client to start WPS mode, and switch
this wireless access point to WPS mode too. You can push Reset/WPS
button of this wireless access point, or click ‘Start PBC’ button in the web
configuration interface to do this; if you want to use PIN code, you have to
know the PIN code of wireless client and switch it to WPS mode, then
provide the PIN code of the wireless client you wish to connect to this
wireless access point. The detailed instructions are listed follow:
Please click ‘General Setup’ at the top of web management interface and
click ‘Wireless Configuration’ on the left hand column. Select ‘WPS’.