3
1-2 Definition of Supported Modes
Modes
The HW7ACW supports 3 different modes.
Repeater:
Also known as range extender, this mode will allow you to repeat
a selected wireless signal so you can extend the coverage of the existing
wireless network. After setup, the device is standalone. Computers or
other networked devices can also be wired into the network port on the unit.
Bridge Mode: The HW7ACW will allow you to connect wired devices
wirelessly to an existing wireless router or
access point. It will “bridge”
these devices wirelessly with your network. It will not broadcast any
Wireless signal. It will only make a wireless connection between the
Access Point and the HW7ACW and allow devices that are only wired to
connect to the wireless network.
Access Point:
The HW7ACW will broadcast a Wireless signal for other
computers and devices to connect to. Must be plugged into the router or
network after setup.
Содержание HW7ACW
