Hawking HW7ACW, Руководство пользователя

Страница: 102 / 136

95
4-1-2 Access Point Web Based Setup
Before you can connect to the HW7ACW and start configuration
procedures, your computer must be able to get an IP address automatically
(use dynamic IP address). If it’s set to use a static IP address, please refer to
‘
Chapter V: Appendix, 5-1 Configuring TCP/IP on PC
’ to set your computer
to use dynamic IP address.
(1)
Use Ethernet cable to connect your computer’s Ethernet port and
wireless HW7ACW’s Ethernet port.
You can also use your computer’s wireless configuration utility to
search for a wireless network called ‘
Hawking_HW7ACW and get
connected. (The default 2.4GHz wireless name of this HW7ACW
device is: ‘Hawking_HW7ACW_2.4GHz’ and the default 5GHz
wireless name is ‘Hawking_HW7ACW_5GHz’)
(2) Open a web browser and it should automatically redirect to the setup
page. Open a web browser and it should automatically redirect to
the setup page. However, if it does not, you can type in
‘
http:// repeater.setup’ in address bar. Note: You can also type in
‘
http://192.168.1.242
’ in the address bar. A window will prompt
you to input username and password. Default username is ‘
admin
’