AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
42
Protocol, vehicle overview
Use the
Show protocol
button on the start
page of the program to open a saved meas-
uring session again at any time.
(Fig. 80)
When you select
Show protocol
, an over-
view of all saved measuring sessions with a
small preview will appear.
(Fig. 81)
By pressing the
Show
button, the selected
data record for a measuring session will ap-
pear on the vehicle overview screen with all
axles.
If the data record for a measuring session has been saved, you will be able to carry out
further measurements on this vehicle days later.
To do this, select the
Continue
button.
(Fig. 81)
(Fig. 80)
