AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
36
Front axle measurement
Turn angle
9.7 Castor, KPI, relative steering angle and max. turn angle
Measurement of the castor, KPI, relative steering angle and max. turn angle is carried out in one
work step. The cameras must be switched on and each one pointed at the front reflector. If this is
not the case, a corresponding instruction window will remind you to position the camera appropriate-
ly before measurement.
•
Before beginning measurement, each camera must
be aligned horizontally using a spirit level.
(Fig. 59)
•
Select the
Turn angle
menu point on the measure-
ment report overview screen.
(Fig. 60)
The work steps that now follow are described by instruc-
tions in the program window and are simultaneously
shown on the monitor screen.
Two green LEDs also appear on the camera when
measuring and when turning in whichever direction.
(Fig. 59)
Symbols in the program window will tell you when to
carry out individual steering movements.
(Fig. 61)
WHILE EXECUTING A TURN ANGLE,
MAKE SURE THAT THE STEERING
MOVEMENT IS EVEN AND SMOOTH
.
Once the procedure is completed, the measured values
recorded will appear after a brief pause.
(Fig. 62)
•
The
Continue
button changes the program back to
the overview screen for the selected axle and dis-
plays the ACTUAL value measured.
(Fig. 62)
(Fig. 59)
Left/right Straight Stop Finished
(Fig. 61)
(Fig. 60)
LED for turn angle
