AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
40
Rear axle measurement
10.2.2 Adjusting when out of square
To adjust the inclination when it is out of square, click
the adjust symbol next to the selection button.
•
Select the
Out of square
button in the selection win-
dow.
(Fig. 72)
•
Both cameras are directed towards the front reflec-
tors and aligned with the help of the spirit level.
•
The inclination of the rear axle is displayed in de-
grees and minutes, both analogue and digital, for
the entire duration of adjustment.
(Fig. 73)
•
The
Continue
button changes the program back to
the overview screen for the selected axle and dis-
plays the adjusted value in the AFTER column.
Now select another rear axle in the program on the
measurement screen.
The example shows: Axle 3 selection.
(Fig. 74)
The program changes to the overview screen for the
new third axle.
The procedure for all further axles is dependent on the
type of axle and is the same as described for axle 1
(steering axle) and axle 2 (rigid axle).
(Fig. 74)
(Fig. 73)
(Fig. 72)
