AXIS4000
W
HEEL
A
LIGNMENT
S
YSTEM
HAWEKA Wheel Alignment –AXIS4000
31
Front axle measurement
9.5 Steering gear middle position
•
Select the "
Steering gear middle position"
menu
point on the overview screen for selection measure-
ment types.
(Fig. 42)
The middle position of the steering gear is measured on
the one steering gear side of the vehicle.
•
If required, the specific steering side can be altered
by clicking the
Left-hand drive
/
Right-hand drive
button.
(Fig. 43)
•
The steering gear must be brought into a central posi-
tion before starting the measurement.
•
The corresponding camera must now be aligned to
the front reflector.
(Fig. 44)
•
Once the reflector has been detected, confirm the
process with the
OK button
on the camera.
•
The camera is now rotated by 180 degrees and
aligned to the rear reflector.
(Fig. 45)
•
Once the second reflector has been detected, confirm
the process again with the
OK button
on the camera.
•
The measured value is displayed as soon as the work
steps have all been completed.
•
The
Continue
button changes the program back to
the overview screen for the selected axle and dis-
plays the ACTUAL measured value.
(Fig. 44)
(Fig. 43)
(Fig. 42)
(Fig. 45)
