97
H4D
Setting CAMERA model and options
These settings are only available when the sensor unit is not
attached to an H4D body.
Proceed as follows:
1. Press the menu (
MENU
) button to open the menu.
2. Use
and
to select the
SETTINGS
sub-menu.
3. Press
to open the
SETTINGS
menu.
4. Use
and
to select
CAMERA
.
5. Press
to open the
CAMERA
menu.
6. Press either the
+
or
–
button to select camera model.
7. Use
and
to select
EXPOSURE TIME
or
CAPTURE SEQ.
if required
.
8. Press either the
+
or
–
button to make new settings
if required.
9. Press the menu (
EXIT
) button to exit the menu system and
keep the settings.
Options available for PINHOLE and FLASH SYNC
Shutter Delay
The normal setting is Default and cannot be changed.
Exposure Time
This setting should be changed for cable-free exposure times
longer than 1/8 second, ensuring that it matches the shutter
speed/exposure time on the camera/lens. The settings range
from 1/8 second to 32 seconds (1/8 second is the default setting).
Capture Sequence
This feature functions in the same manner as an interval timer.
Initial delay: Controls the amount of time required to elapse
before the first capture.
Delay: Controls the amount of time required between each
capture.
Count: Controls the total number of captures required.
8
1
2
3
4
6
5
7
9
