manualshive.com logo in svg

Hasselblad CFV, Руководство пользователя

Поделиться
Скачать
Hasselblad CFV Скачать руководство пользователя страница 35

35    

Charge indication

When connected to a power socket, the indicator lamp (

I

) on the charger displays three 

conditions:

GREEN

  — 

the charger is functioning correctly.

RED

         

—  

the battery is charging.

GREEN

   —   the charging process is complete and the battery can be removed. 

General 

•  The battery should be charged for approximately 12 hours before first time use.
•  Maximum battery capacity is reached only after the battery has been charged and discharged several times. 
•  The battery is best charged at an ambient temperature of 10°−45°C  (50°− 113°F). 
•  Avoid frequent full discharges. As the battery is a Li-ion type, it has no ‘memory effect’ of practical importance and there

-

fore frequent recharges will cause no problems such as loss of capacity or poor performance. It is therefore better practice 
to recharge the battery at very regular intervals, regardless of use. 

•  Remove the battery if you intend to store the camera for some while as it will eventually become completely drained, even 

though the camera/CFV is turned off.

•  When removing a battery from the charger and immediately replacing it with another, allow a few seconds to elapse so 

that the charger can automatically reset for the next charging procedure.

•  It is perfectly normal for the battery to become warm when being charged. 
•  A slight temporary loss of battery performance might be noticed at very high or low temperat ures. Take the appropriate 

measures if this is the case. 

•  If you do not intend to use the battery for a while, it is best to store it in a cool place (in a domestic refrigerator is ideal). 
•  The battery should have a usable service life of around 300 recharge/discharge cycles.

Battery Pack F-570 CFV – precautions

•  Connect the battery to the CFV correctly.
•  Do not use the battery for anything other than Hasselblad CFV digital backs.
•  Do not immerse the battery in liquids.
•  Do not incinerate the battery. Please recycle or discard in an environmentally approved manner.
•  To charge, do not use any other charger than the Battery Charger 8.4V CFV.

Battery Charger 8.4V CFV – precautions

•  Read the instructions before using the charger.
•  Use indoors only (protect against moisture).
•  Do not use the charger for anything other than charging a Hasselblad Battery Pack F-570 CFV.
•  Do not alter the charger in any way other than changing the plug attachments.
•  Ensure the power socket (domestic/automobile) specifications match the specified requirements of the Battery 

Charger 8.4V CFV.

With 

NO

 battery 

attached

With a battery 

attached

I

Technical specifications   —   Battery Pack F-570 CFV / Battery Charger 8.4V CFV

Battery:

 

Li-ion type

AC input voltage: 

 100–240VAC

DC input voltage (via adapter supplied):

 

12–24V (Short-circuit protected)

Storage temperature:

 

-20º C through 45º C

Usage temperature:

 

0º C through 45º C

Usage humidity:

 

10% through 95%

Содержание CFV





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды