background image

89    

 

Equipment care & Service  

EQUIPMENT CARE

•   

Keep all equipment and accessories out of the reach of small children.

•    Do not place heavy objects on the equipment.

•    Do not use the batteries except as specified.

•    Use only the batteries specified for use with the 503CWD and CFV.

•    Remove the batteries when cleaning the camera or if you intend to leave it 

unused for a long period.

•    If you use spare (standard or rechargeable) battery packs be particularly 

careful to use the supplied protective cap when storing. There is a potential 
fire risk if the contacts are short circuited across a conductive object (such as 
keys in a pocket, for example).

•    Take particular care when working with strobe / studio flash units to prevent 

damage to equipment and personal injury.

•    Do not attempt to open the CFV.

• 

Always replace the protective cover when the CFV is not mounted on the 

camera.

• 

Do not touch the exposed sensor filter with your fingers.

• 

Ensure that the databus connections are not damaged or soiled in any way. 

• 

Keep all foreign objects out of the 503CW and CFV openings.

• 

Keep the original shipping boxes for storage.

•   Keep your 503CWD or CFV and all other computer equipment away from 

moisture. If your 503CWD or CFV becomes wet, disconnect from power and 
allow it to dry before attempting to operate again.

•   Never cover the ventilation openings on the 503CWD or CFV when in use.

•   Never try to remove the glass IR filter from the front of the sensor; this will 

probably ruin the sensor. If dust manages to get between the sensor and IR 
filter, please contact your Hasselblad dealer for assistance.

• 

Avoid frequent and severe temperature changes and be particularly careful 
in humid environments. Allow the equipment to acclimatize whenever pos-
sible before use. Try to ensure the storage conditions in such environments 
are as dry as possible. 

• 

Prevent dust and grit from getting into your equipment. In coastal areas take 
measures to protect your equipment from sand and salt water spray. 

DISPOSAL

If you need to dispose of a 503CW, CFV or batteries, please do so in an 
environmentally friendly manner at the local waste plant/ recycling centre 
or similar.

SERVICE 

Return your equipment to a service centre for occasional checking and 
preventive maintenance to ensure optimal reliability. 

• 

Avoid physical shocks to the 503CW and CFV. Some form of protective case or 
camera bag is advised for transportation.

 

• 

Hasselblad equipment is much sought after and you should take obvious 
steps to prevent theft. Never leave it visible in an unattended car, for exam-
ple. Separate and specific camera insurance cover should be considered by 
professional users.

World class results are possible with Hasselblad equipment, witnessed by so 
many front covers, international advertising campaigns, famous portraits, his-
torical events, etc. But it is the combination of this fine equipment and the abili-
ties of the photographer that produce memorable images. Some of this skill is just 
sound photographic practice and sometimes it is product specific. The following 
books are recommended for those that wish to immerse themselves in the world 
of Hasselblad. The information in them varies from general interest to completely 
invaluable. 

“The Hasselblad Manual” (Seventh edition) by Ernst Wildi. Published by Focal 

Press — ISBN-10: 0240810260 / ISBN-13: 978-0240810263. 

Contains all the information you need to know about the operation of the ana-
logue Hasselblad camera systems, including both recent and earlier equipment. 

 

Further reading  

  Disposal of Waste Equipment by Users in Private Households 

in the European Union

This symbol on the product or on its packaging 
indicates that this product must not be disposed of 
with your other household waste. Instead, it is your 
responsibility to dispose of your waste equipment 

by handing it over to a designated collection point for the 
recycling of waste electrical and electronic equipment. The 
separate collection and recycling of your waste equipment 
at the time of disposal will help to conserve natural 
resources and ensure that it is recycled in a manner that 
protects human health and the environment. For more 
information about where you can dispose of your waste 
equipment for recycling, please contact your local city 
office, your household waste disposal service or the retailer 
where you purchased the product.

Also contains excellent general practical photographic advice. Written by a 
world-renowned lecturer on the Hasselblad system and its practical application. 
A book for the practising Hasselblad photographer.

“Hasselblad System Compendium” by Richard Nordin — ISBN 978-0-

9869188-0-3. www.cloakhill.com/www.hasselbladcompendium.com.

A complete round up of the history of all Hasselblad products up to and including 
the H4D. Contains photos and descriptions of rare items long since out of produc-
tion. A mine of information for those interested in a chronicle of the company and 
the development of its products. It contains a unique collection of dates, lists and 
almost anything you would want to know about the history and background of 
Hasselblad equipment. A book more for the Hasselblad collector or as an infor-
mational source for used equipment.

Содержание CFV





























































































Отзывы: