10 HASCO hot runner
3.3 Identification marking on the controller
The type plate is mounted on the side of the controller housing. It contains the type designation with the number of
zones, the electrical connection data and the manufacturer’s data.
Figure 4 - Type plate
3.3.1 Wiring of the plug systems
The plug-in connectors for connecting up the temperature sensors and heating elements to a hot runner are available
on the rear of the controller. The customer-specific wiring plan for the plug-in systems is located on the side of the
controller housing (see Figure 6 for an example).
Figure 5 - Wiring of plug systems
4 Commissioning
4.1 Electrical connection
Important! Before the device is connected to the supply voltage, a check must first be
performed to ensure that the mains electricity conditions comply with the specifications on
the type plate.
The electrical connections must be performed by a qualified electrician. Commissioning
and operation while the controller is running are only to be carried out by authorised
qualified personnel.
Switching off all the outputs or individual zones will not protect any of the outputs against
hazardous voltages. Before working on the connected heating elements, the associated
connections must be unplugged, or the entire device disconnected from the mains power.
Before the device is opened, it must be disconnected from the mains power.
