Bedienungsanleitung H1280
HASCO hot runner 41
Service file
The service file contains technical data that are useful for support when analysing
errors.
A click on the icon in the left-hand side of the screen starts the saving process. The
dialogue for selecting the target directory will appear. The target directory can be
changed by pressing the arrow. After selecting the desired target directory, the
process can be confirmed by pressing the tick, or cancelled with X. Successful
compilation of the service file is indicated by a brief message at the bottom of the
screen.
Support
The support page contains the main contact data for support.
A one-day password can also be requested here if the password has been
forgotten. (See also: Settings > Device > User management)
The login button for service employees releases further details that are only
available to service employees.
Factory settings
The controller can be reset using two different methods. If "Load default
parameters” is selected, all the parameters will be reset to their default values. All
files on the device, such as recipe files, protocols and screenshots are retained.
If “Reset to factory setting” is selected, all the parameters will be reset to their
default values and all files on the device will be deleted. This requires the user level
“Administration” or higher.
In both cases, a dialog will appear for entering the corresponding password.
5.4 Index of keywords
1.
Index of keywords
The index contains all the important keywords with a brief explanation and makes it possible to navigate, with a single
click, to the page on which the settings are made.
There are two ways to find the term being searched for. The alphabetical list can be scrolled by pressing the rectangle
at the right edge of the screen and moving it up or down. Or, the first letter of the term being searched can be clicked
beneath the menu bar (A to Z).
If the terms marked in colour are clicked, these will lead directly to the screen page where the settings for this term are
made. Terms in white are not navigable but serve solely as explanations.
5.5 Switch all outputs on and off
In the menu bar
A longer press on the arrow button will start the heating process by activating the controller outputs. Zones in the “Inactive
mode” operating mode will remain switched off. When the outputs are activated, the internal relays will close and the
output level will be output at the corresponding contacts.
