Harris Intraplex HD Link RF, Руководство по установке и эксплуатации

Страница: 67 / 181

4 – Front Panel Configuration & Operation HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation 4-33
Intraplex Products
If you do not change the Inactivity Timer setting, the timer continues to trigger the system to
lock display screens when the front panel buttons have not been used for the configured time.
Note: If you make any changes to this screen, you must select Apply and press Enter on the
previous screen to save and apply changes.
4.1.5.3 Redundancy Setup
Select Redundancy Setup on the System Setup front panel screen to access the Redundancy
Setup screen (Figures 4-52 and 4-53).
Figure 4-52. System Setup

Redundancy Setup - Transmitter
Figure 4-53. System Setup

Redundancy Setup – Receiver
Redundancy Role: Access the Redundancy Role configuration screen.
Audio Mute Control (receiver only): Access the Audio Mute Control configuration screen.
Back: Select this command and press Enter to return to the previous screen.
Apply: Select this command and press Enter to save and set the values shown on this screen.
Remember to select this command to save any changes you have made.
Note: After drilling down to change parameters, you must select Apply on this screen and press
Enter for the changes to take effect.
Section 4.2.6 gives more information on configuring your transmitters and receivers for redundancy.
Redundancy Role
Select Redundancy Role on the Redundancy Setup front panel screen to access the
Redundancy Role configuration screen (Figure 4-54).