Harris Intraplex HD Link RF, Руководство по установке и эксплуатации

Страница: 125 / 181

5 – Web Browser Interface Configuration & Operation HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation 5-21
Intraplex Products
Redundancy
● System State : Select the Active or Standby option to switch the system to actively
transmit/receive broadcast audio signals or to remain in a ready state for future broadcast use.
● Redundancy Role : Select the Primary , Secondary , or Standalone redundancy role for this
system.
● Mute audio on standby (receiver only): Select this check box to mute audio signals (drop
incoming audio signals) when the system switches from active to standby (default) so that you
can audibly tell which receiver is Active and which is Standby
OR clear the check box for the
receiver to continue passing audio signals when it is in Standby mode.
● Current state : Shows whether the system is Active or on Standby .
Front Panel Display
● Inactivity timeout : From the drop-down list, select Off to disable the timeout function so that
the front panel display screen continues to appear despite inactivity. Or, select a time period of
inactivity that must elapse before the system takes the specified
Action On Timeout :
• 30 seconds
• 1 minute
• 3 minutes
• 5 minutes
• 10 minutes
• 1 hour
● Action On Timeout : Select the Go black or Go black and lock keys option as the action the
system takes after the specified Inactivity timeout has elapsed.
Return Path Configuration (receiver only)
Use a return path : Select this check box to begin using a return path or clear the check box to
disable the return path.
Peer LAN port address : Shows the current peer LAN port address for return path tunneling. You can
set this port address on the transmitter page; this field is read-only and cannot be changed on the
receiver page.
Automatic Configuration (receiver only)
Get audio configuration and return path IP address from transmitter : Select this check box for
the receiver to sync with the transmitter and obtain any audio configuration changes and any return
path IP address from the transmitter. The Automatic Configuration function allows the transmitter to
send this information to the receiver at a rate of once per second:
● Audio channel parameters
•
On or off
• Sampling rate
• Word length
• Stereo or mono mode
● Auxiliary audio channel state – On or off
● LAN port IP address for return path tunneling
With this function on (check box selected), you only need to change these parameters on the
transmitter, and the changes are automatically made on the receiver.
Note: You need to clear the Automatic Configuration check box before making any changes to the
Audio Configuration parameters on the Program Services page (Section 5.3.6.2).
Reset : Click this button to return all settings back to their values when the page was loaded or last
saved.
Save : Click this button to record and apply changes.