Harris Intraplex HD Link RF, Руководство по установке и эксплуатации

Страница: 59 / 181

4 – Front Panel Configuration & Operation HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation 4-25
Intraplex Products
LAN Port Netmask IP Address
Select IP Netmask on the LAN Port screen to access the IP Netmask screen (Figure 4-35).
Figure 4-35. LAN Port

IP Netmask
This screen shows the netmask IP address assigned to the LAN port. Press these buttons on the
display to change this address:
• Press the horizontal buttons (

) to move to the left (

) or the right (

) to select the digit
to change. The horizontal line under a digit shows that digit is currently selected.
• Press the vertical buttons (

) to change the digit by either lowering (

) or raising (

) its
value.
• Press Enter to keep changes until you can Apply them on the previous screen.
• Press Cancel to erase your changes and return to the previous address.
Color Codes: White = currently applied value; yellow = value changed but not saved or applied.
Cancel: Press this button to return to the previous screen.
Note: If you make any changes to this screen, you must select Apply and press Enter on the
previous screen to save and apply changes.
LAN Port Return Path IP Address
Select Return Path on the LAN Port screen to access the Return Path IP address screen (Figure
4-36).
Figure 4-36. LAN Port

Return Path
Press these buttons on the display to change the value to either YES or NO or to exit this screen:
• Press the vertical buttons (

) to set a Return Path (

) or to disable the path (

).
• Press Enter to keep changes until you can Apply them on the previous screen.
• Press Cancel to erase your changes and return to the previous address.
Color Codes: White = currently applied value; yellow = value changed but not saved or applied.
Cancel: Press this button to return to the previous screen.