Harris Intraplex HD Link RF, Руководство по установке и эксплуатации

Страница: 63 / 181

4 – Front Panel Configuration & Operation HD Link Installation & Operation Manual
Version 2, April 2010
Harris Corporation 4-29
Intraplex Products
Figure 4-42. Default Gateway

Default Gateway IP Address
This screen shows the current IP address for the default gateway. Press these buttons on the
display to change this address:
• Press the horizontal buttons (

) to move to the left (

) or the right (

) to select the digit
to change. The horizontal line under a digit shows that digit is currently selected.
• Press the vertical buttons (

) to change the digit by either lowering (

) or raising (

) its
value.
• Press Enter to keep changes until you can Apply them on the previous screen.
• Press Cancel to erase your changes and return to the previous address.
Color Codes: Green = power up; red = power down; yellow = standby.
Cancel: Press this button to return to the previous screen.
When you set the default gateway IP address and press Enter, the previous screen reappears,
showing the newly entered gateway (Figure 4-43).
Figure 4-43. Default Gateway with New Gateway Not Applied
The default gateway appears in yellow because the change has not been saved. Select Apply and
press Enter to save the new gateway (Figure 4-44).
Figure 4-44. Successful Change
Press Enter to return to the previous screen. The new IP address on Default Gateway screen
now appears in white, indicating the change has been saved.