Harris Intraplex HD Link RF, Руководство по установке и эксплуатации

Страница: 54 / 181

HD Link Installation & Operation Manual 4 – Front Panel Configuration & Operation
Version 2, April 2010
4-20 Harris Corporation
Intraplex Products
HD Port Detail
Select HD Port on the Network Setup menu screen to access the HD Port screen (Figure 4-27).
Figure 4-27. Network Setup

HD Port
IP Address: Access the HD Port IP Address detail screen.
IP Netmask: Access the HD Port Netmask detail screen.
MAC Address: System MAC address.
Oper State: Whether the HD port is operating ( UP - green) or not ( DOWN - red).
Admin State: Access the HD Port Admin State detail screen.
AutoNeg: Access the HD Port Auto Negotiation detail screen.
Speed: Present HD port speed.
Duplex: Whether the HD port is running in FULL or HALF duplex mode.
Back: Select this command and press Enter to return to the previous screen.
Apply: Select this command and press Enter to save and set the values shown on this screen.
Remember to select this command to save any changes you have made.
Note: After drilling down to change parameters, you must select Apply on this screen and press
Enter for the changes to take effect.
Color Codes: red = power DOWN ; green = power UP .
HD Port IP Address
Select IP Address on the HD Port screen to access the IP Address screen (Figure 4-28).
Figure 4-28. HD Port

IP Address
This screen shows the IP address assigned to the HD port. Press these buttons on the display to
change this address: