Harris Atlas DVL1100, Техническое руководство

Страница: 73 / 180

2/25/03 888-2473-001 3-13
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
ATLAS Series™
3.6 Power Amp Main Menu
If you press the Power Amp button on the control
panel overlay, or the Power Amp button on the
HOME screen, it will take you to the screen shown in
Figure 3-12. The Power Amp Menu structure is
shown in Figure 3-45 on page 3-38.
Figure 3-12 Power Amplifier Screen
This screen shows the Forward and Reflected power for a particular PA cabinet. For
multiple PA cabinet transmitters, there are PA cabinet select buttons at the bottom
of the screen. Each of the amplifier select buttons in the middle of the screen are for
navigation to Module Status screens which have detailed fault status information on
each module. These buttons are also status indicators with 3 different modes:
a.
OK - The icon is green as shown here for modules 2-7.
b.
Fault - The icon turns red as shown here for module 1.
c.
Disconnected - When a module is unplugged its icon turns gray as shown here
for module 8.
To get detailed information on a particular PA Module, press the desired amplifier
button in the middle of the screen. Any of these buttons will take you to the PA
Faults screen shown in Figure 3-13.
To Figure 3-13
To Figure 3-15
To PA Faults screen, Figure 3-13
To Figure 3-17
To Figure 3-3