Installation
10
Vision
2
Instruction Manual
5.
Press enter again to confirm the new setting. The unit will prompt for the write password for modifying settings in the space
provided (the default is snake). You will need to enter this password whenever you change settings.
6.
A new set of menus should now be visible. Select the info menu and check the software version. Ensure that Opera 10 version
2.34 or 2.5.2 (FIG. 13) or Opera 11 version 3.3.2a.20 is running.
NOTE: Opera 11 is now supported but units equipped with Opera 11 need to use a new Vision2 URL outlined in the "Browser
Homepage" section below.
7.
Select the back option and return to the main menu.
Set-Top Box Networking
Setup networking on the set-top box as follows:
1.
Select the DHCP menu.
2.
Change the DHCP setting to disabled.
3.
Enter an IP address, Netmask, Gateway and (optional) DNS server setting for the set top box.
Browser Homepage
Set the browser home page for your set-top box to point to a page on your Vision2 master server:
1.
Use the arrow keys on the keyboard to access the Browser option, and press the right arrow cursor key to enter this page
(FIG. 15).
FIG. 13
Software Version
FIG. 14
Network Settings
FIG. 15
Set-Top Box Browser Configuration
