Harman AMX DXLINK DX-TX-DWP-4K страница 52 Скачать руководство пользователя

Страница: 52 / 91

NetLinx Programming of DXLink Receivers

Hardware Reference Manual – DXLink™ Twisted Pair 4K Transmitters/Receivers

Aspect Ratio Options

Stretch

(to fit) – This option (default) scales the video to full screen size in both horizontal and vertical directions regardless of the

input aspect ratio. No data is cropped. However, the image may be distorted as needed to fill the screen. When Stretch is selected,

black bars are not added by the scaler. However, if an image has originated from a source device with either horizontal or vertical

black bars (e.g., letter box from a movie), the black bars will be considered as active video and will be included in the stretched

video.

Maintain (

aspect ratio) – This option maintains the incoming video’s aspect ratio, but will scale the image until the display fills

either horizontal or vertical direction first. If the vertical direction is filled first, then the video will have pillar box black bars on the

sides of the display. If the horizontal direction is filled first, then the video will have letter box black bars on the top and bottom of

the display.

Zoom

– This option maintains the input aspect ratio while zooming the image to fill the screen in all directions. Image data may be

lost on the top and bottom or to the left and right of the displayed image.

Anamorphic

– This option is used with anamorphic formatted video sources so that images appear correctly on the display.

DXLink Receiver Audio SEND_COMMANDs

DXLink Receiver Audio SEND_COMMANDs are sent to Port 6.

Audio SEND_COMMANDs (Receivers)

Command

Description

?AUDOUT_MUTE

Requests the setting for the Mute

preference of the audio from the

Receiver (Enable or Disable).

Syntax:

SEND_COMMAND <DEV>,"'?AUDOUT_MUTE'"

Example:

SEND_COMMAND dvRX,"'?AUDOUT_MUTE'"

Returns a COMMAND of the form:

AUDOUT_MUTE-<ENABLE|DISABLE>

AUDOUT_MUTE

Sets the Mute preference of the audio

from the Receiver to Enable (no

sound) or Disable.

Syntax:

SEND_COMMAND <DEV>,"'AUDOUT_MUTE-<ENABLE|DISABLE>'"

Example:

SEND_COMMAND dvRX,"'AUDOUT_MUTE-ENABLE'"

?AUDOUT_FORMAT

Requests the audio format on the

Receiver.

Syntax:

SEND_COMMAND <DEV>,"'?AUDOUT_FORMAT'"

Valid response:

format = HDMI, ANALOG, ALL

Example:

SEND_COMMAND dvRX,"'?AUDOUT_FORMAT'"

Returns a COMMAND of the form:

AUDOUT_FORMAT-<format>

AUDOUT_FORMAT

Sets the audio format on the Receiver

(default is ALL).

Syntax:

SEND_COMMAND <DEV>,"'AUDOUT_FORMAT-<format>'"

Valid response:

format = HDMI, ANALOG, ALL

Example:

SEND_COMMAND dvRX,"'AUDOUT_FORMAT-ANALOG'"

Содержание AMX DXLINK DX-TX-DWP-4K




























































































Результаты поиска

Содержание AMX DXLINK DX-TX-DWP-4K

Отзывы:

Похожие инструкции для AMX DXLINK DX-TX-DWP-4K

Бренды по названию

Популярные бренды

Harman AMX DXLINK DX-TX-DWP-4K, Справочник по аппаратуре

Результаты поиска

Содержание AMX DXLINK DX-TX-DWP-4K

Отзывы:

Похожие инструкции для AMX DXLINK DX-TX-DWP-4K

Бренды по названию

Популярные бренды