Harman AMX DXLINK DX-TX-DWP-4K Скачать руководство пользователя

Страница: 37 / 91

Network Configuration

Hardware Reference Manual – DXLink™ Twisted Pair 4K Transmitters/Receivers

Network Configuration

Overview

IMPORTANT:

The information in this Chapter does not pertain to the 4K HDMI Wallplate TX as the device does not provide TCP/IP

communication to a network, does not have an IP address to configure, and does not require resettable factory settings.

IMPORTANT:

If DXLink Modules are connected to an Enova DGX 100 Series Switcher using auto-setup, see the “Hardware Reference

Manual – Enova DGX 100 Series Digital Medial Switchers” for network configuration information.

NOTE:

If a DXLink Module has been configured for auto-setup mode and then auto-setup mode has been disabled, the unit may take

longer to appear in NetLinx Studio than expected (1-2 minutes).

DXLink Modules support two IP Addressing Modes: Static IP and DHCP (with link-local fallback*).
To avoid having a large system consume numerous IP addresses, Modules default to disabling the network connection functionality.

Therefore, the #3 Toggle must be set to ON before the Module can establish a network connection (see page 26).
When #3 Toggle is ON, DXLink Modules are automatically placed in DHCP Mode, but they can be configured for either of the

IP Addressing Modes via two methods:



The front-panel ID Pushbutton (see page 40)



Telnet commands (see page 67)

* “Link-local fallback” is a method by which an IP host, as a fallback from DHCP, can derive a local network-unique IP address by

negotiating with the other IP hosts on the same network. Link-local can also be used in its own right as the primary method of

IP address allocation. For details, see “DHCP Mode” below.

Static IP Mode – Default Parameters

IMPORTANT:

Static IP Mode will not function until the #3 Toggle on the DIP switch is set to ON (see page 26). The #3 Toggle must be

ON before the device is accessible via SEND_COMMANDs.

DHCP Mode

IMPORTANT:

DHCP Mode will not function until the #3 Toggle on the DIP switch is set to ON (see page 26). The #3 Toggle must be ON

before the device is accessible via SEND_COMMANDs.

DHCP Mode requires a connection to a network with a DHCP server located on it. This connection can be either indirect or direct.



Indirect connection

– In the case of an Enova DGX Digital Media Switcher or a Solecis 4K Digital Switcher (Endpoint Mode)

that is connected to a DHCP server device, the DHCP connection can be propagated through the system’s DXLink layer. First

you must complete the following:



Set the #3 Toggle to ON to enable the network connectivity.



Direct connection

– In the case of a standalone pair (Extender Mode), to place a DXLink Module in DHCP Mode you must

complete the following:



Set the #1 Toggle to ON to enable access to the physical ICS LAN 10/100 port.



Set the #3 Toggle to ON to enable network connectivity (DHCP).



Connect the ICS LAN 10/100 port to a network where a DHCP server is located.

When in DHCP Mode (default setting), the Module will attempt to get a DHCP lease (consisting of IP address, gateway, and other

network parameters). Should the attempt fail, the Module will then configure itself for a link-local address.



DXLink Modules utilize a modified link-local addressing procedure. The first address to be tried is a known address in the

link-local space: 169.254.2.2. That address will be probed, and if unclaimed will be used by the DXLink Module.



If 169.254.2.2 is already claimed, the DXLink Module will choose a random address within the 169.254.x.x link-local address

space (again probing to ensure that it is unclaimed).

A Module operating with a link-local address will periodically re-try DHCP and re-assign the IP to a valid DHCP grant if successful. At

any time, if the Module determines that its IP address has changed, it will disconnect from the Master (if necessary, depending on

the connection state) and then reconnect to the Master.

Default Parameters for Static IP Mode

Address

192.168.1.2

Netmask

255.255.255.0

Gateway

192.168.1.1

DNS1

192.168.1.1

DNS2

192.168.1.1

DNS3

192.168.1.1

Содержание AMX DXLINK DX-TX-DWP-4K




























































































Результаты поиска

Содержание AMX DXLINK DX-TX-DWP-4K

Отзывы:

Похожие инструкции для AMX DXLINK DX-TX-DWP-4K

Бренды по названию

Популярные бренды

Harman AMX DXLINK DX-TX-DWP-4K, Справочник по аппаратуре

Результаты поиска

Содержание AMX DXLINK DX-TX-DWP-4K

Отзывы:

Похожие инструкции для AMX DXLINK DX-TX-DWP-4K

Бренды по названию

Популярные бренды