Harman AMX DXLINK DX-TX-DWP-4K Скачать руководство пользователя страница 16

Страница: 16 / 91

Product Overview and Specifications

Hardware Reference Manual – DXLink™ Twisted Pair 4K Transmitters/Receivers

DXLink Transmitter and Receiver Specifications

The specifications in the table below apply to the following Transmitters and Receivers:



FG1010-330-BL – DX-TX-DWP-4K (US), Black



FG1010-330-WH – DX-TX-DWP-4K (US), White



FG1010-510 – DX-RX-4K

General Specifications

Parameter

Value

Approvals

CE, UL, cUL, FCC Class A, RoHS, WEEE

AC Power (Module Only)

• 100 to 240 VAC single phase, 50 Hz to 60 HZ
• 0.6 A @ 115 VAC max.

DXLink Power

DXLink Twisted Pair Transmitters (DX-TX-DWP-4K):

Power can be supplied by a DXLink Power

sourcing device such as an Enova DGX Digital Media Switcher, PS-POE-AT-TC High Power PoE

Injector (FG423-84) or PDXL-2 Power over DXLink Controller (FG1090-170). AMX does

not

support the use of any other power supplies or PoE injectors as these may potentially damage the

DXLink equipment.

DXLink Twisted Pair Receiver (DX-RX-4K):

Power can also be supplied by a DXLink Power sourcing device such as an Enova DGX Digital

Media Switcher or Solecis 5x1 4K Digital Switcher (SDX-514M-DX), PS-POE-AT-TC High Power

PoE Injector (FG423-84), or PDXL-2 Power over DXLink Controller (FG1090-170). AMX does

not

support the use of any other power supplies or PoE injectors as these may potentially

damage the DXLink equipment.

Power Budget for Transmitters and Receiver:

When installed in conjunction with the Enova DGX Digital Media Switcher, use the Enova DGX

Configuration Tool located at www.amx.com/enova to determine the power requirements of

the configuration and whether any of the DXLink Transmitters or Receivers should be

powered with the local power supplies or the supported Power over DXLink injector. The

configuration tool contains instructions on how to determine power requirements.

Power Consumption,

Local 12 V Supplied (max.)

• DX-RX-4K 18.5 W

Power Consumption,

Enova DXLink Power Supplied (max.)

• 4K HDMI Wallplate TX 4 W
• DX-RX-4K 17.8 W

Thermal Dissipation,

Local 12 V Supplied (max.)

• DX-RX-4K 63 BTU/hr.

Thermal Dissipation,

Enova DXLink Power Supplied (max.)

• 4K HDMI Wallplate TX 14 BTU/hr.
• DX-RX-4K 61 BTU/hr.

Power Connector (Module Only)

2.1 mm DC power jack

Operational Temperature

32° F to 104° F (0° C to 40° C)

Storage Temperature

-22° F to 158° F (-30° C to 70° C)

Operational Humidity

5 to 85% RH (non-condensing)

Storage Humidity

0 to 90% RH (non-condensing)

4K HDMI RX Module - Dimensions

Depth

Width

Height

5.19 in. (13.18 cm)

8.75 in. (22.22 cm)

1.00 in. (2.54 cm)

Module - Weight

Approximately 1.1 lb. (0.50 kg)

Module - Shipping Weight

Approximately 2.2 lb. (1.00 kg)

Modules - Mounting Options

Compatible with all V Style versatile mounting options including rack, surface, or pole (for V Style

Mounting kits, see www.amx.com)

4K HDMI Wallplate TX - Dimensions

Depth

Width

Height

1.75 in. (4.5 cm)

1.27 in. (3.23 cm)

4.2 in. (10.67 cm)

4K HDMI Wallplate TX - Weight

Approximately 0.45 lb. (0.2 kg)

4K HDMI Wallplate TX - Shipping

Weight

Approximately 1.05 lb. (0.47 kg)

4K HDMI Wallplate TX - Mounting

Options

4K HDMI Wallplate TX mounts onto standard single-gang US, UK, or EU back boxes

MTBF

896,000 hrs.

Transport Layer Throughput

10.2 Gbps

Содержание AMX DXLINK DX-TX-DWP-4K




























































































Результаты поиска

Содержание AMX DXLINK DX-TX-DWP-4K

Отзывы:

Бренды по названию

Популярные бренды

Harman AMX DXLINK DX-TX-DWP-4K, Справочник по аппаратуре

Результаты поиска

Содержание AMX DXLINK DX-TX-DWP-4K

Отзывы:

Бренды по названию

Популярные бренды