Product description
Your cPµ1 charging station permits safe and comfortable charging of electric
vehicles according to Norm IEC 61851-1, Mode 3.
Depending on the respective variant your cPµ1 is laid out for charging as fast as
possible due to its circuit design and its diameter of cables and pins.
The cPµ1 also offers a fixed charging cable according to IEC 62196-2 of either
Type 1 or Type 2, depending on your variant.
We set maximum value on the user‘s safety on all of our products. Therefore, the
cPµ1 Wallboxes offer effective protection against short circuit, electric shock and
other threats because of its protection equipment.
Via two LED lights on the housing, the user is always informed about the current
state of the charging station.
I
dentifying your product variant
The cPµ-series consists of multiple variants which differ in charging cable and charging
capacity. Therefore they serve different implementation profiles. Inside the housing of
the Wallbox you will find an identification plate. Open the housing cover before
installation and operation in order to verify the type of variant with help of the
identification plate:
In particular the model description (cPµ1
XTYY) and data of the power supply
(voltage, power frequency, current) are
relevant for identification.
Detailed information to cPµ1 charging stations can be found in section ”Technical
specifications” on page 24.
Instruction Manual
cPµ1
charging station
Version: 1.3.5
11
