Operating instructions/Maintenance
Please note the following instructions regarding usage and maintenance of your
device:
•
This device
MUST ALWAYS
be connected to the protective conductor of the
power supply.
•
Please ensure that the rated nominal voltage and rated nominal current of the
device correspond with the requirements of your local power supply system
and that the nominal capacity is not exceeded during charging.
•
Always follow the local safety regulations of the country you are installing or
using the device .
•
In order to fully disconnect the charging station from the power supply always
disconnect the lead through one or more automatic cut-outs.
•
Never install or operate the charging station in constricted rooms. In particular
please ensure that vehicles can be parked within instructed distance to the
charging station. The charging cable must never be strained with tensile
strength when it is connected.
•
Make sure that the front side of the housing cover is always closed to prevent
unauthorized opening.
•
DO NOT
modify the housing or the wiring inside the Wallbox
in any case
.
Violation contravenes the guarantee specifications and annul the warranty
immediately.
•
There are no components inside the product that will need to be maintained by
the user.
•
Only deploy qualified staff to install and/or repair your device.
ATTENTION!
The cPµ1 charging station is designed for installation and operation at
230 /400V 50 Hz. The lead has to be inserted through a suitable cable
channel or a tube on the bottom side of the housing.
•
For cleaning use a dry or a slightly damp piece of fabric. DO NOT use any
aggressive cleaners, wax or solvents (such as cleaning petrol or paint thinners
for example). These can tarnish the display or damage the varnish.
•
The cpµ1 charging station MUST NOT be cleaned with a pressure washer or
similar devices which apply high pressure on the housing when cleaning.
Instruction Manual
cPµ1
charging station
Version: 1.3.5
7
