HARDT
Responsive, Reliable Solutions
CUS-009-0028-11
Page 17 of 21
Electrical
THE ROTISSERIE IS SUPPLIED WITH A 6.0 FOOT [1830 MM] LONG ELECTRICAL CORD. THE CORD IS
EQUIPPED WITH A THREE-PRONG (GROUNDING) PLUG FOR YOUR PROTECTION AGAINST SHOCK
HAZARD AND SHOULD BE PLUGGED DIRECTLY INTO A PROPERLY GROUNDED THREE-PRONG
RECEPTACLE. DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM THIS PLUG.
THE APPLIANCE MUST BE ELECTRICALLY GROUNDED IN ACCORDANCE WITH LOCAL CODES OR, IN
THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70, OR THE
CANADIAN ELECTRICAL CODE, CSA C22.2, AS APPLICABLE.
IF REQUIRED BY LOCAL REGULATION, A GROUND FAULT CURRENT INTERRUPTER (GFCI) MUST BE
INSTALLED BY A QUALIFIED ELECTRICIAN.
The appliance electrical diagram is located on the inside surface of the right side access panel.
WHEN THE OVEN IS PLUGGED IN, THERE ARE POTENTIALLY DANGEROUS VOLTAGES PRESENT IN THE
CONTROL CIRCUITS.
DO NOT OPEN THE ELECTRICAL COMPARTMENT AS POTENTIALLY LETHAL VOLTAGES ARE PRESENT
INSIDE.
