HARDT
Responsive, Reliable Solutions
Page 4 of 21
CUS-009-0028-11
2.
Before You Begin
About This Manual
This manual contains information necessary for the installation of the HARDT Equipment Manufacturing
(hereafter referred to as Hardt) Inferno 4500 rotisserie. Retain this manual for future reference. To help the
reader in the utilization of this manual, certain information has been highlighted using the following
conventions:
INFORMATION THAT REFERS TO ACTIONS WHICH MAY HAVE CONSEQUENCES POTENTIALLY
DANGEROUS TO OPERATOR AND/OR THE EQUIPMENT.
Information for proper installation and functioning.
Additional important information.
Who Should Install the Equipment
Only qualified persons should perform this installation. Gas, water and drain connections must be done by
persons qualified to do such tasks. All electrical connection installation must be done by a qualified
electrician. The strain relief cable must be installed by a qualified contractor.
Equipment Safety
ENSURE THAT THE ELECTRICAL CORD IS UNDAMAGED AND NO BARE WIRES ARE VISIBLE.
FOR YOUR SAFETY, DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. KEEP THE AREA AROUND THE
APPLIANCE FREE FROM ALL COMBUSTIBLE MATERIALS.
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE, OR MAINTENANCE CAN CAUSE
PROPERTY DAMAGE, INJURY, OR DEATH. READ THIS INSTALLATION MANUAL THOROUGHLY
BEFORE INSTALLING THIS EQUIPMENT.
IF THE ROTISSERIE IS EQUIPPED WITH CASTERS, IT MUST BE SECURED TO THE BUILDING
STRUCTURE IN ORDER TO LIMIT THE MOVEMENT OF THE ROTISSERIE SO STRESS IS NOT
TRANSMITTED TO THE GAS CONNECTIONS.
IF YOU SMELL GAS, CLOSE THE GAS SUPPLY VALVE AND CALL YOUR LOCAL GAS TECHNICIAN
IMMEDIATELY.
AN ADEQUATE AIR SUPPLY MUST BE SUPPLIED TO THE ROTISSERIE AT ALL TIMES DURING
OPERATION TO ENSURE A PROPER FLOW OF COMBUSTION AND VENTILATION AIR.
FAILURE TO FOLLOW THE INSTRUCTIONS LISTED IN THIS DOCUMENT CAN RESULT IN INJURY,
DEATH, AND PROPERTY DAMAGE THAT MAY NOT BE COVERED BY YOUR WARRANTY.
•
Read all documentation; only people who have read and understand this manual should install the
equipment.
•
Do not operate this equipment if it is damaged in any way.
•
Do not use unauthorized accessories.
Contact Hardt or an approved service provider immediately if any problems are encountered
with your equipment.
