manualshive.com logo in svg

Hardi NAVIGATOR 3000, Руководство оператора, Страница: 92 / 122

Поделиться
Скачать
Hardi NAVIGATOR 3000 Скачать руководство пользователя страница 92

6 - Maintenance

90

Occasional maintenance

General info

The maintenance and replacement intervals for the following will depend very much on the conditions under which the 
sprayer will be operated and are therefore impossible to specify.

Lifting and Removing the Pump

When lifting and removing the pump, use a shackle fitted to the built-in 
lifting eye located between the heads (A).

±

WARNING! To prevent damages in case of a free-falling pump, use 
lifting gear with at least 4 tons max. tensile strength.

÷

NOTE! Pump weight is approximately 165 lbs. (75 kg.).

Pump valves and diaphragms replacement

Diaphragm pump overhaul kit (valves, seals, diaphragms etc.) can be 
ordered. Detect the pump model - kit can be ordered using correct 
HARDI® part No.:

Model 364: part No. 75585900

Model 464: part No. 75586000

1.

Lift off the plastic covers (C) with your hands (A) by pulling with the 
finger tips while pushing with the thumbs in the center, as shown 
in (B).

Содержание NAVIGATOR 3000



























































































































Отзывы:

Нет отзывов