manualshive.com logo in svg

Hardi NAVIGATOR 3000, Руководство оператора, Страница: 75 / 122

Поделиться
Скачать
Hardi NAVIGATOR 3000 Скачать руководство пользователя страница 75

5 - Operation

73

Standard Cleaning

˜

ATTENTION! For cleaning between spray jobs where crops are not very sensitive towards chemicals just sprayed.

1.

Engage pump with tractor in idle, so that pump speed is as low as possible (250/550 r.p.m., depending on pump type).

2.

Turn suction SmartValve towards 

 and the pressure SmartValve towards 

 until approximately 1/6 of the rinse 

tank contents are transferred into the main tank. It is important to have full agitation for approximately 20 seconds, and 
then close agitation valve completely.

3.

Turn suction SmartValve towards 

 and the pressure SmartValve towards 

 with all sections off for 

approximately 45 seconds.

4.

Turn all sections on. Spray until air comes out of nozzles. When pressure drops, increase the pressure (regulation valve 
closed/max. pressure). When the boom is completely empty, decrease the pressure for a few seconds (regulation valve 
partially open) to avoid a pressure spike when restarting.

Repeat the following 3 steps 5 times:

1.

Turn suction SmartValve towards 

 and the pressure SmartValve towards 

 until approximately 1/6 of the rinse 

tank contents are transferred into the main tank.

2.

Turn suction SmartValve towards 

 and the pressure SmartValve towards 

 with all sections off for 

approximately 45 seconds.

3.

Turn all sections on. Spray until air comes out of nozzles. When pressure drops, increase the pressure (regulation valve 
closed/max. pressure). When the boom is completely empty, decrease the pressure for a few seconds (regulation valve 
partially open) to avoid a pressure spike when restarting.

Quick Reference - Standard Cleaning

÷

NOTE! Pump speed 250-280 r.p.m.

A.

Turn On.

B.

Turn Off.

C.

Minimum 45 seconds with nozzle Off.

D.

Spray until air comes out of nozzles. When pressure drops, increase the pressure (regulation valve closed/max. 
pressure). When the boom is completely empty, decrease the pressure for a few seconds (regulation valve partially 
open) to avoid a pressure spike when restarting.

A

B

C

C

D

D

1/6

1/6

5 x    1/6

5 x    1/6

Содержание NAVIGATOR 3000



























































































































Отзывы:

Нет отзывов