manualshive.com logo in svg

Hardi NAVIGATOR 3000, Руководство оператора, Страница: 34 / 122

Поделиться
Скачать
Hardi NAVIGATOR 3000 Скачать руководство пользователя страница 34

3 - Description

32

Night Spraying Light (Boom mounted lights)

Floodlights (A) are mounted on the spray boom, and they are positioned 
to illuminate both boom wings for spraying at night. 

The work light lamp (B) is also mounted to the railing of the platform 
above the valves. This lamp is positioned to light up the HARDI® 
TurboFiller and the valve system. 

The boom lights (A) are turned on/off by the controller unit in the 
tractor.

The work light (B) is turned on/off by activating a switch inside the left 
side cover (C).

External Cleaning Device (optional)

This equipment is comprised of a hose reel and a spray gun used to 
clean the complete sprayer externally in the field with clean water. The 
External Cleaning Device is located on the sprayer’s right side just 
behind the ChemLocker.

±

WARNING! This cleaning device produces a high pressure spray. 
Incorrect use may result in injuries!

€

DANGER! For the safety of yourself and others, the following rules 
should always be observed:

•

Never point the water jet at people, animals, electrical 
installations or other sensitive objects.

•

Never try to clean clothing or footwear while worn by 
yourself or others.

•

Never operate with bare feet or sandals.

•

It is recommended to wear goggles.

•

Protect yourself and others in the area from particles bouncing up during cleaning.

Содержание NAVIGATOR 3000



























































































































Отзывы:

Нет отзывов