Hardi NAVIGATOR 3000 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 122

Hardi NAVIGATOR 3000 Скачать руководство пользователя страница 33

3 - Description

31

ChemLocker

A ChemLocker for storage of chemical containers etc. can be mounted
on the sprayer’s right side.

If the optional FoamMarker is installed, then the FoamMarker tank may
be placed inside the ChemLocker.

ATTENTION! Maximum load 225 lbs./25 gal. (100 kg/100 liters).

SafetyLocker

The locker is integrated in the left side, just above the SmartValves.

It is for the purpose of storing non-contaminated protective gear, soap
for hand washing, etc.

The locker is split in two compartments for the separation of clean
clothes from gloves with risk of contamination.

±

WARNING! Although this locker is meant for storing nontoxic
items, it must never be used for storing food, beverage or other
things meant for consumption.

Night Spraying Light (Platform mounted lights)

The 2 boom flood light lamps (A) are mounted to the railing of the
platform (one at each side) and are positioned to illuminate both boom
wings. The work light lamp (B) is also mounted to the railing of the
platform above the valves. This lamp is positioned to light the HARDI®
TurboFiller and the valve system. The boom and work lights selector
switch is placed just below the SafetyLocker (between valve shield and
EasyClean filter).

«
...
31
32
33
34
35
...
»

Содержание NAVIGATOR 3000



























































































































Отзывы:

Нет отзывов