manualshive.com logo in svg

Hardi NAVIGATOR 3000, Руководство оператора, Страница: 84 / 122

Поделиться
Скачать
Hardi NAVIGATOR 3000 Скачать руководство пользователя страница 84

6 - Maintenance

82

Grease Gun Calibration

Before lubricating the sprayer, you must calibrate your grease gun to ensure that the correct amount of grease is applied to 
each lubrication point. The correct amount of grease applied will prolong the lifetime of the sprayer.

Calibration example

1.

Insert the correct grease cartridge in your grease gun.

2.

Apply grease onto a tissue or a piece of paper. Complete 10 full 
strokes of the grease gun.

3.

Place the paper with grease on a scale (A).

4.

If your grease pile weighs for example 10 grams (0.4 oz.), then 1 
stroke equals 1 gram (0.04 oz.) of grease.

When calibrated, you can count how many strokes to complete when 
lubricating the different grease points on the sprayer, according to the 
specifications.

Alternative method

1.

Count the strokes, until you have 10 grams (0.4 oz.) of grease piled 
up on the scale (A).

2.

Now you can figure out how many strokes to use for applying a 
certain amount of grease to a lubrication point.

 Lubrication & Oiling Plan - Trailer/ParaLift™

Boom Lubrication & Oiling Plan

A separate “Boom Operator’s Manual” is supplied with your sprayer and contains detailed information on boom safety,
set-up, operation and maintenance.

€

DANGER! Important information on Safety, Operation and Maintenance specific to your boom configuration is 
detailed in the “Boom Operator’s Manual” supplied with your sprayer. It must be read and fully understood by anyone 
intending to operate this equipment. Failure to do so could result in serious personal injury or death.

Содержание NAVIGATOR 3000



























































































































Отзывы:

Нет отзывов