Harbor Freight Tools Central Machinery Industrial 95302, Инструкция по сборке и эксплуатации

Страница: 20 / 32

Page 20 SKU 95302
for technical questions, please call 1-800-444-3353.
Never attempt to remove material stuck in the moving parts of the Bandsaw while
it is plugged in and running. Turn off the Bandsaw if the workpiece is to be backed
out of an uncompleted cut.
IMPOrTANT: When in the horizontal cutting mode only, the Motor Toggle Switch
(750-5) will automatically turn to its
“Off” position and shut off the Bandsaw’s Mo-
tor when the cut has been completed.
Once the cut is made, check to make sure the Motor Toggle Switch (750-5) is in its
“Off” position. Turn the Coolant Pump Toggle Switch (750-5) to its “Off” posi-
tion. Turn the Coolant Pump Fitting (91S) to its
“CLOSED” position. Then, unplug
the Power Cable (500) from its electrical outlet.
(See figure Q.)
Wait until the Saw Blade (251) comes to a complete stop. Then, raise the Saw Head
to its full vertical position. Turn the Cylinder (216) to its
“Off” position to lock the
Saw Head in place. Remove the workpiece from the Vise assembly (9, 22) and
scrap material from the Swivel Base (1) of the Bandsaw.
(See figure Q.)
Turn the Cylinder (216) to its
“ON” position. Slowly lower the Saw Head to its hori-
zontal position. Then, turn the Cylinder to its “Off” position to lock the Saw Head
in place.
(See figure Q.)
14.
15.
16.
17.
18.