Harbor Freight Tools Central Machinery Industrial 95302, Инструкция по сборке и эксплуатации

Страница: 13 / 32

Page 13 SKU 95302
for technical questions, please call 1-800-444-3353.
To Adjust The Stop Block:
Loosen the Thumb Screw (38) that holds the Stop
Block (41) to the Stock Stop Rod (40).
(See figure I.)
Adjust the Stop Block (41) to the desired length
position. Then, re-tighten the Thumb Screw (38).
(See figure I.)
1.
2.
THUMB
SCrEW
(38)
STOP
BLOCK
(41)
STOCK
STOP rOD (41)
(WOrKPIECE
NOT INCLUDED)
fIGUrE I
THUMB
SCrEW
(38)
STOP
BLOCK
(41)
STOCK
STOP rOD (41)
(WOrKPIECE
NOT INCLUDED)
fIGUrE I
To Convert The Bandsaw for Vertical Use:
NOTE: Notching, slitting, and contour work is best
done with the Bandsaw in its vertical position.
Raise the Saw Head to its full vertical position,
making sure it locks in position by turning the Cyl-
inder (216) to its
“Off” position. (See figure j.)
Remove the two Screws (266-7), and remove the
Small Vertical Cutting Plate
(266-3).
(See figure K.)
Guide the Saw Blade (251) through the slot in the
Large Vertical Cutting Plate (867), and secure it in
position with the two Screws (266-7).
(See figure K.)
1.
2.
3.
4.
CyLINDEr
(216)
fIGUrE j
CyLINDEr
(216)
fIGUrE j
SCrEWS (266-7)
SMALL VErTICAL CUTTING PLATE (266-3)
SCrEWS (266-7)
SAW
BLADE
(251)
fIGUrE K
LArGE VErTICAL CUTTING PLATE
(867)