Four post lift
Happ25 4 post hoist
Version 7.0
©HAPP Australia Pty Ltd
Page 7
serious personal injury and even death.)
1.4
Expected Rated Lifted Assignment
In principle, the lift we design supports double direction placement of the car, however,
it’s better to use the shorter arm to support the motor end, because in this case there
will be less wear and tear for the lift
1.5
Attentions
l
Operating controls are designed to close when released. Do not block open or
override them.
l
NEVER overload your lift. Manufacturer’s rated capacity is shown on the
nameplate affixed to the lift. ALWAYS be clear of the gross weight of vehicle.
l
NEVER use the lift to raise one end or one side of vehicle.
l
NEVER raise vehicle with anyone inside it. No one should be in the lift area
during operation.
l
ALWAYS keep lift area free of obstructions, grease, oil, trash and other debris.
Before lowering lift, be sure tool trays, stands, etc. are removed from under your
vehicle. Release locking devices before attempting to lower lift.
l
Adequate ventilation should be provided when working with internal combustion
engines.
l
Use only manufacturer’s recommended attachments.
l
KEEP HANDS AND FEET CLEAR from any moving parts. Keep feet clear of lift
when lowering. Avoid pinch points.
l
GUARD AGAINST ELECTRIC SHOCK. This lift must have ground connection
during using to protect the operator from electric shock. Never connect the green
power cord wire to a live terminal. This is for ground only.
l
DANGER! The power unit used on this power contains high voltage.
l
Cut power before performing any electrical repairs. Put plug in a safe distance from
power so that it cannot be accidentally plugged in during service.
l
WARNING! RISK OF EXPLOSION. This equipment has internal arcing or sparking
parts which should not be exposed to flammable vapors. This machine should not
be located in a recessed area or below floor level.
Rated Load
Happ25
4000 kg
