Four post parking lift Happ25 4 post hoist
35
The hoist should now be in its basic installed configuration as below.
Confirm the hoist is in the correct location and install the overrun prevention plates. The full sized
plates are placed at the opposite end to entry location on the hoist. The half size plates are placed on
the entrance end of the hoist allowing runways to be fitted and overrun plate to be added when in
storage mode.
Route the cables through the pulleys up to the top of the columns locating the cables with a washer and
two nuts above the column cap. The external lock requires only the routing of the cables and fixing to
