Hanna Instruments HI931 Скачать руководство пользователя страница 75

Страница: 75 / 218

5-17

TITRA

TION METHODS

The Limit 2 value must not be equal to the Limit 1 value.

5.5.7.3. FILTERED DERIVATIVES

Option: Yes or No

This option adds a filtering procedure in the 1st and 2nd derivative computation algorithm that reduces the influence of pH or mV
noise.
The

Filtered Derivative

s option can be enabled by selecting "

Yes"

in the

Filtered Derivatives Option

screen.

Noise can be due to:
• Chemical system properties (sample, titrant, solvent), such as slow chemical reactions or unbuffered samples such as

wastewater, tap water, wine

• Electrode response
• Incorrect method parameters settings such as

Signal Stability, Stirring Speed,

etc.

• Insufficient titrant additions

Note:

A shift in the end point volume by 1 or 2 doses may be seen due to filtering.

Содержание HI931



























































































































































































































Результаты поиска

Содержание HI931

Отзывы:

Hanna Instruments HI931, Руководство пользователя, Страница: 75 / 218

Результаты поиска

Содержание HI931

Отзывы: