Hanna Instruments HI931 Скачать руководство пользователя страница 142

Страница: 142 / 218

10-8

AUXILIARY FUNCTIONS

Sample Name:

Allows the sample name to be recorded in each report. The sample name will increase by one, with each new

titration or logging report, if the last character is a number.

Company Name:

Allows the company name to be recorded in each report.

Operator Name:

Allows the operator name to be recorded in each report.

Electrode Name:

Allows the electrode name to be recorded in each report.

Fields 1, 2, 3:

Allows any additional information to be recorded in each report.

The fields must be selected from

Setup Titration Report

screen (see

Setup Titration Report

section) in order to be displayed in the

titration report.

10.3.4. METER INFORMATION

Displays titrator configuration data.

Titrator Serial Number:

The serial number of the titrator base board.

Analog Board 1 Serial Number:

The serial number of the analog board.

Pump 1 (and/or 2) Serial Number:

The serial number of the connected pump.

Titrator Software Version:

The current software version installed on the titrator.

Base Board Software Version:

The current software version present on the base board of the titrator.

Pump 1 (and/or 2) Software Version:

The current software version for the pump.

Analog 1 Calibration Date:

Manufacturer calibration date of the analog board.

Note:

If more than 1 year elapsed from the calibration date of the analog board 1, the message

Analog 1 Calibration Due

Calibration Due

will appear on the main screen. The analog board needs to be recalibrated.

Содержание HI931



























































































































































































































Результаты поиска

Содержание HI931

Отзывы:

Hanna Instruments HI931, Руководство пользователя, Страница: 142 / 218

Результаты поиска

Содержание HI931

Отзывы: