manualshive.com logo in svg

Hanna Instruments HI931, Руководство пользователя, Страница: 42 / 218

Поделиться
Скачать
Hanna Instruments HI931 Скачать руководство пользователя страница 42

3-6 

USER INTERF

ACE

The user interface contains several screens. For each titrator function, one or more screens are used.

3.2.3.    THE MAIN SCREEN

After start up and initialization, the first screen displayed is the main screen.
Main screen fields:

Method name:

 

  Displays the name of the selected method.

Time and date:

 

  Displays the current date and time.

Temperature reading:

 

  Displays the measured temperature. 

 

ATC:

 

  Automatic temperature compensation

 

Manual:

 

  Manual temperature compensation 

 

Manual

: 

  Temperature probe is not connected, manual temperature compensation

Stirrer

 

information

: 

  The selected stirrer and actual/set stirrer speed is displayed in RPM. When stirrer is off, 

   

  the stirrer information is not displayed.

End

 

point

 

volume

: 

  Displays the volume delivered to reach the titration end point. When no titration  

   

  has been performed, the displayed volume is “0.000 mL”.

Result

: 

  Displays the titration result or the direct reading measurement.

mV

 

or

 

pH

 

reading

: 

  Displays the current readings. The reading will be in mV or pH.

 

mV:

 

  Indicates actual potential reading. 

 

rel

 

mV:

 

  Indicates relative potential reading.

 

pH:

 

  Indicates actual pH value.

Titration status:

 

  Displays the status of the selected titration.

   

   

   is displayed when a titration has not been performed.

Reminders:

 

  Indicates when a task needs to be performed and displays error

Pump

 

1

 

selected:

 

  Displays the active pump.

No Results

Содержание HI931



























































































































































































































Отзывы:

Нет отзывов