Hanna Instruments HI931 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 218

Hanna Instruments HI931 Скачать руководство пользователя страница 48

4-4

GENERAL OPTIONS

The option keys allow the following operations:

Deletes the highlighted file.

Deletes all currently displayed files.

Copies the highlighted file from titrator to a USB storage device.

Copies all currently displayed files from titrator to a USB storage device.

Returns to the

General Options

screen.

The status of the transfer (“Successful”/“Unsuccessful”) and the file name of the currently processed file are displayed during copying or
deleting.

Note:

The saved files will be stored on the USB key in the

HI931

folder, as follows:

- Methods:

USB Drive:\HI931\Methods\*.mtd

- Reports:

USB Drive:\HI931\Reports\*.rpt

4.2. RESTORE FILES FROM USB STORAGE DEVICE

This screen allows the user to transfer files from the USB storage device to the titrator.
Standard Method Files -

HIXXXXYY.MTD

(e.g.: HI0001EN.MTD, HI1004EN.MTD)

User Method Files

-

USERXXXX.MTD

(e.g.: USER0001.MTD)

Report Files

-

Ti_XXXXX.RPT, mV_XXXXX.RPT, pH_XXXXX.RPT, ISEXXXXX.RPT, mVrXXXXX.RPT

(e.g.: Ti_00001.

RPT, mV_00001.RPT, pH_00001.RPT, ISE00001.RPT, mVr00001.RPT)

Use the

and

keys to select the file type.

The number of files and the file name will be displayed.

«
...
46
47
48
49
50
...
»

Содержание HI931



























































































































































































































Отзывы:

Нет отзывов