manualshive.com logo in svg

Hanna Instruments HI931, Руководство пользователя, Страница: 168 / 218

Поделиться
Скачать
Hanna Instruments HI931 Скачать руководство пользователя страница 168

Hanna Instruments reserves the right to modify the design, construction or appearance of its products without advance notice.

The 

HI931 

is warranted for two years against defects in workmanship and materials when used for its intended 

purpose and maintained according to instructions. Damage due to accidents, misuse, tampering or lack of 
prescribed maintenance is not covered.
If service is required, contact your local Hanna Instruments Office. If under warranty, report the model number, date 
of purchase, serial number and the nature of the problem. If the repair is not covered by the warranty, you will be 
notified of the charges incurred. If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods 
Authorization (RGA) number from the Technical Service department and then send it with shipping costs prepaid. When 
shipping any instrument, make sure it is properly packed for complete protection.

Warranty

Before using this product, make sure it is entirely suitable for your specific application and for the 
environment in which it is used. Any variation introduced by the user to the supplied equipment 
may degrade the meters’ performance. For yours and the meter’s safety do not use or store the 
meter in hazardous environments.

Recommendations

 

for Users

Содержание HI931



























































































































































































































Отзывы:

Нет отзывов