manualshive.com logo in svg

Hanna Instruments HI931, Руководство пользователя, Страница: 23 / 218

Поделиться
Скачать
Hanna Instruments HI931 Скачать руководство пользователя страница 23

1-1

INTRODUCTION

1.    INTRODUCTION

HI931

 is an automatic potentiometric titrator with high accuracy, great flexibility and repeatability.

The titrator is designed to perform a variety of potentiometric titrations, allowing the user to obtain both good results and high-speed 
analysis.
The main attributes of the 

HI931 

titrator are:

•  Small footprint, requires minimal bench space
•  Casing made with strong, chemically resistant plastic
•  Flexible electrode holder supports up to 3 electrodes, 4 dispensing tubes, 1 temperature sensor and removable stirrer 
•  Electrode holder positions electrodes in the center of beaker, allowing for smaller sample sizes
•  Integrated Peristaltic Pump available for reagent addition
•  Support for 100 titration methods
•  User-customizable reports
•  Integrated research grade pH/mV/ISE meter
•  Clearly displayed warning and error messages

This manual provides information regarding installation and functionality of the titrator and refined operation suggestions.
Before using the titrator, it is recommended you become familiar with its various features and functionality.

Содержание HI931



























































































































































































































Отзывы:

Нет отзывов