manualshive.com logo in svg

Hanna Instruments HI931, Руководство пользователя, Страница: 56 / 218

Поделиться
Скачать
Hanna Instruments HI931 Скачать руководство пользователя страница 56

4-12 

GENERAL OPTIONS

4.13.    SETUP BALANCE INTERFACE

This screen allows the users to connect an analytical balance for automatic acquisition of sample mass prior to titration or 
standardization.

The balance is connected to the titrator via RS 232 interface.
Press 

 to add a new balance to the list.

Press 

 to enable the selected balance.

Press 

 to disable the selected balance (automatic weight acquisition will be not available).

Press 

 to customize the name and serial communication parameters used by the selected balance.

Be sure that the settings on the titrator 

Balance Configuration

 menu match the settings for your particular balance (baud rate, data 

bits, parity, stop bits number, request command syntax). It may be necessary to change settings on your balance. Users should 
consult their balance instruction manual.
Before leaving this screen, be sure the connection with the balance is working properly by pressing the 

 key.

Содержание HI931



























































































































































































































Отзывы:

Нет отзывов