Hanna Instruments HI931 Скачать руководство пользователя страница 105

Страница: 105 / 218

7-7

pH MODE

7.2.5. CALIBRATION REMINDER

Option: Daily, Periodic or Disabled

Daily:

The calibration reminder will appear daily at a specified time.

Periodic:

The calibration reminder will appear after the set time has elapsed since the last calibration.

Disabled:

The calibration reminder will not appear.

7.2.6. SET REMINDER PERIOD

Daily

Periodic

option was selected for the calibration reminder, the reminder period must also be set.

For a daily reminder period, the time of day can be set.
For a periodic reminder period, the number of days, hours and minutes can be set.

• Press

to move the cursor to the next field.

• Press

to save the changes or

to return to the previous screen.

• Press

to disable the calibration reminder and return to pH setup.

Содержание HI931



























































































































































































































Результаты поиска

Содержание HI931

Отзывы:

Hanna Instruments HI931, Руководство пользователя, Страница: 105 / 218

Результаты поиска

Содержание HI931

Отзывы: